FortiGate Dial UP with Cisco

[Liza1]

Hello, I’m interested in the following information.
I have a FortiGate Firewall 90G, and I need to establish tunnels with many Cisco routers — about 100 of them.
Is there any example or method that would make this setup easier, so I don’t have to manually configure 100 individual tunnels?

For example, is it possible to configure a Dial-Up VPN on the FortiGate, where the Cisco routers act as clients and connect using a pre-shared key (PSK)?

I’d like to hear your opinion on this. Thank you in advance!

[hst1]

Hello team,

It is not possible to configure dialup VPN from the cisco router instead you can follow the article and configure the VPN from FortiGate to cisco

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-setup-IPsec-VPN-between-FortiGate-a...

Regards 

[Richie_C]

Hi @Liza1 

I believe that it would be possible for the FortiGate to be the dialup server. I would start with the VPN wizard (VPN > IPSEC Wizard) and select the hub and spoke option. In this case, the FortiGate will be the hub. You would then have to match up the settings manually for the Cisco side.

Regards