Hi,
We're running a pair of 1000C's in A-P (v5.0,build3608 (GA Patch 7)).
We currently manage both FW's using MGMT1 with one dedicated IP.
Does anyone how to give the primary and secondary separate dedicated MGMT IP's ?
I'd like to use MGMT 1 on Primary and MGMT 2 on secondary - each with a different IP address.
Thanks,
PJ
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello mark9885,
I 've had the same error.
In my case, this error has been resolved by deleting :
- static route associated to mgmt
- source-ip setting in the syslog server config
Maybe that the error could appear if the mgmt interface is part of firewall policies, this error could appear to.
I guess that the interface has not to be part of a specific configuration before to be used as reserved management interface.
Hello mark9885,
I 've had the same error.
In my case, this error has been resolved by deleting :
- static route associated to mgmt
- source-ip setting in the syslog server config
Maybe that the error could appear if the mgmt interface is part of firewall policies, this error could appear to.
I guess that the interface has not to be part of a specific configuration before to be used as reserved management interface.
That was it, there were statics set up on the mgmt to give me access. Console access is not optional unless you are fluent with this stuff and then advisable.
Many thanks...
Sorry for Second Hijack :)
but I want to share revelation with You during my time with Fortigate
Network description:
We got 2 Fortigate 90E v5.6.3 build7719 (GA) with HA enabled working fine
We got ISP modem with 600Mbps download speed - Check with Laptop connected directly to modem
and standard network with 2 switches TP-Link connected to master and slave Fortigate 90E
about 20 clients on switches
network working fine but seems HA Fortigate decrease download speed to 100-150Mbps
Problem description:
I disconnect HA cable from slave router I got 600Mbps
I connect HA cable to slave router I got 100-150Mbps
speed tested on oakla
Is any one spoted problem like this
any clue will by precious
This problem persist too ... on Laptop connected directly to ISP modem (behind FortiGate routers)
greetings for AllFortiUsers
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1711 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.