Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
FortiGateAdmin
New Contributor II

FortiGate AON SFP + AVM Fritz!Box

Hello,

can I use the SFP module of an AVM Fritz!Box in the FortiGate 80E?

I already had the module installed in the Fritz!Box once, but I can't get a connection. In the AVM, the module works and also establishes a connection.

Or does anyone here have experience with AON SFP modules to connect fiber Internet in Germany?

 

Greetings

4 REPLIES 4
AEK
SuperUser
SuperUser

Hello

Although many SFP brands should work but in case you have an issue I guess you won't be supported.

At least you can try, it will not break your FGT.

AEK
AEK
FortiGateAdmin
New Contributor II

Good morning,

I was able to put the included module of the AVM Fritz!Box into operation in the FortiGate. It took only two - three minutes until the connection was established.

This is the AON module from AVM.

 

get system interface transceiver
Interface wan1 - Transceiver is not detected.
Interface wan2 - SFP/SFP+ (1.3G)
Vendor Name : ACAL BFi
Part No. : ABSFBLNO55-20DAC
Serial No. : ....
SFP-DSL MAC :

Optical Optical Optical
SFP/SFP+ Temperature Voltage Tx Bias Tx Power Rx Power
Interface (Celsius) (Volts) (mA) (dBm) (dBm)
------------ ------------ ------------ ------------ ------------ ------------
wan2 42.5 3.32 22.48 -4.4 -6.0
++ : high alarm, + : high warning, - : low warning, -- : low alarm, ? : suspect.

tuky
New Contributor

I'm going to try the same with the XGS-PON SFP+ from AVM Fritz

karlzre
New Contributor

@tuky could you share with me what's the part number you can read when you install the XGS-PON SFP+ from AVM Fritz in the fortinet ?

Thx

Labels
Top Kudoed Authors