Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
pheerasaran
New Contributor

FortiGate 7.4.4 can't create IPSec VPN policy GUI?

Hello Everyone, 

 

I found a problem, in the firewall policy not display ipsec tunnel. I'm not sure is a bug in this version because I tried create with cli it's work.

 

 
 

Screenshot 2567-08-27 at 16.24.28.pngScreenshot 2567-08-27 at 16.24.52.pngScreenshot 2567-08-27 at 16.26.29.png

3 REPLIES 3
jamesmid
New Contributor


@pheerasaranofficial wrote:

Hello Everyone, 

 

I found a problem, in the firewall policy not display ipsec tunnel. I'm not sure is a bug in this version because I tried create with cli it's work.

 

 
 

Screenshot 2567-08-27 at 16.24.28.pngScreenshot 2567-08-27 at 16.24.52.pngScreenshot 2567-08-27 at 16.26.29.png


If you’re unable to create an IPSec VPN policy in the FortiGate 7.4.4 GUI, it could be due to a few reasons. First, ensure you have the correct permissions and that your firmware is up to date. Sometimes, a GUI issue might be resolved by clearing the browser cache or trying a different browser.

dbhavsar
Staff
Staff
pheerasaran

Hello @dbhavsar , 

in this case. The interface is SD-WAN, SD-WAN has 4 links, and in the firewall policy, not select per interface.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors