FortiGate 6300F diagnose debug

[live89]

Hi

Does anyone facing the same issue I have that diagnose debug is not working with 6300F series?

It's working only if you connect to the specific FPC that the traffic hitting

But in order to know which FPC every time I need to run packet capture> download it> searching the appropriate pcap file then I know which FPC ...

Is there another way to run the diagnose debug within the MBD CLI ??

[live89]

Update:

I just saw an improvements for the diag debug CLI for 6K and 7K series in the 6.0.4 version (page 6)

https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/3d51d50e-6830-11e9-81a4-005056...

We're going to upgrade very soon

I hope this is gonna work as its written in the release notes

[wdeloraine_FTNT]

Hi,

diagnose debug sniffer any '<filter>' 4 0 l command will display the FPC where the traffic is handled.

Here's some doc related to the built in sniffer feature:

https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Using-the-FortiOS-built-in-packet-sn...