FortiGate-60F from 12V DC source - is it the standard 12V ±10% ??

[HenrikBruun]

If i want to supply FortiGate-60F from 12V DC source - what is min and max input voltage

is it the standard 12V ±10% ??

[amrit]

You can check the power specifications in the datasheet here: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-fortiwifi-60f-series.pdf

[HenrikBruun]

First place i looked. - before posting.

It only says 12Vdc, 3A
no tolerance

[alafrance · Accepted solution]

Hi Henrik,

I believe this will need to be discussed with your field SE for specifics as they may have to inquire about particular models internally.

Normally though for a regular Fortigate-60F the power-supply included is the one you should use. Only the Fortigate-Rugged 60F is designed with the intent for customers to supply their own DC input.

From a cursory glance internally where I can see comments specifying this for a few models the usual tolerances are ±10% , so I wouldn't be surprised if that was the case here as well , but this shouldn't be treated as confirmation.