FortiGate 60E multiwan setup

[SpartaniusZG]

85.85.85.85/29 with WAN 1 IP 85.85.85.82 with default gateway 85.85.85.81 VIP are 85.85.85.82 - 86 86.86.86.86/29 with WAN 2 ip 86.86.86.82 with default gateway 86.86.86.81 VIP are 86.86.86.82 - 86 I have 6 vlans(vlan 1-3), 3 are going on wan 1 Out other 3 on WAN 2 Out (vlan 4- 6) I have static routes 0.0.0.0/0 85.85.85.81 wan1 0.0.0.0/0 86.86.86.81 wan2 Policy route define belonging vlan with belonging wan address For example vlan 1 to wan 1-vlan 1 addresses-all All policy to wan are applied and working When i try traceroute for every vlan the defaul gateway is 85.85.85.81!! How to set policy that each vlan has belonging default route!??

[abelio]

Hello

you're posting in the wrong forum; this one is just for ADC stuff.

Re-post this in the relevant FortiGate forum, surely you'll be luckier there