Hello everyone In my company, I have two 200F FG. One for branch office, one for HQ. HQ and Branch are so close so I want to maybe connect two sites physically in one server room. I would like to use 200F as HA Active Passive mode but I am not sure about the performance. Here is why:
If I use one FortiGate as active, it will have the traffic from Core switch that connectes to two distribution switch + 8 access switches in total. For subnets, I have currently 10 subnets each on FG, 18 FW policies each
Do you think that I could achieve to use FG 200F for all this traffic? there is no server or internal routing. Just pure internet connection :)
I have re-checked the documentation and compared our actual traffic use. One of our FG uses max 4,000 sessions per second with nTurbo of 60% - 80%, the other one uses max 2,000 sessions per second with nTurbo of 40% - 70%
Depending on the documentation, if I looked up the right section, concurrent sessions are 3 millions, concurrent sessions are 280 000.
I have 7 subnets on each FG, and all of them uses internet, not much of heavy internal policy or something
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.