Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Dubos
New Contributor III

FortiGate 1500 handle QinQ traffic

We are going to deploy the Fortigate 1500d stack and we need to find out if it can work in QinQ mode ("802.1ad" or "set vlanforward enable"), and if so, do all versions of FortiOS support it?

With respect,

Daniil Dubosarskij

cit.rkomi.ru

1 Solution
Golle
New Contributor II

I found this article: https://docs.fortinet.com/document/fortigate/7.0.2/administration-guide/78126/qinq

 

I think it is a FortiOS 7.0 feature since QinQ is not mentioned in any of the 6.4 administration guides that I've read through.


NSE7

View solution in original post

2 REPLIES 2
Golle
New Contributor II

I found this article: https://docs.fortinet.com/document/fortigate/7.0.2/administration-guide/78126/qinq

 

I think it is a FortiOS 7.0 feature since QinQ is not mentioned in any of the 6.4 administration guides that I've read through.


NSE7
Dubos
New Contributor III

Thanks. It seems that in previous versions it was just called "vlanforward". And as far as I understood, reading different sources, it was always into all FortiGate devices, but I needed some kind of confirmation. 

With respect,

Daniil Dubosarskij

cit.rkomi.ru