Hi all,
I have a Fortigate (7.4.4) with a discovered FortiExtender (7.4.3) in WAN extension mode added to it. From the FortiExtender, I can ping anywhere on the internet. I have a /30 link between it (Port1) and the Fortigate (Port A), and I can ping it's LAN address from the Fortigate, and vise versa.
I cannot for the life of me see as to how to get it Online, or as to why it is showing as Offline.
On the Fortigate, I have Fabric allowed. When I do a diag sniffer packet on port 5246, I'm not seeing anything at all
Any thoughts or pointers as to where to check next ?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi championc1,
Thank you for reaching out. Since the sniffer does not show any traffic on port 5246 I assume traffic is not reaching the fortigate unless the sniffer is not setup correctly or the command is not working on the fortigate as a far shot possibility. I suggest capturing on the FEX first:
Thank you,
saleha
Thanks Saleha
Would the correct command to use be "execute tcpdump -n port 5246" ? If so, that produced absolutely nothing
Hi championc1,
That means possible config issue. I recommend opening a support ticket for better assistance at this point.
Thank you,
saleha
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.