Hello everyone
does anybody have the above combination running successfully?
The E3372 is supported with firmware 3.0.1 - but does not seem to work.
Also a VERY old Modem (E173) is NOT connecting at all.
As from the LEDs it seems everything is OK.
We also get a "tunnel IP" from the Fortiextender - but no data at all is flowing.
On the FEX20D on the shell we even see "connected with 150mbps" ...
Anybody having a hint here?
Fortigate 80D - F/W 5.4.1
FortiExtender 20D - F/W 3.0.1
Thanks in advance
Joerg Hermanns
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
There have been updates to FortiExtender firmware to address this... Have you contacted Fortinet Support? if so please post your ticket # here for investigation.
FWIW, I once got the Huawei E173 working with a FEX-20A, v2.0. The main point is to switch the stick from 'mass storage mode' to 'modem mode'. That's what the 'USB string' is for but it didn't work then. Finally, I put the stick on a PC and switched the mode using the supplied mgmt software (? from Vodafone or Huawei, too long ago). After that, it just worked.
Generally, modem stick + FEX is quite a nightmare. But, when it work it works.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1709 | |
1093 | |
752 | |
446 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.