FortiEMS VPN Configuration - XAuth settings missing

[rcheesman]

XAuth settings options missing from GUI.  Have to manually enter the XAuth tags into the XML to set XAuth to any other setting than the default of disabled.

[ergotherego]

What version of EMS are you running? I am on 1.2.1 and it has the bug where XML settings are overwritten by the GUI.

Looking at the release notes for 1.2.2, I don't see any mention of XML.

[rcheesman]

EMS Version:  1.2.1.0394

I just saw the post about 1.2.2 being released.  Even though there is no mention of xml, I think I am going to try it out.  I'll update this post after.

[rcheesman]

EMS 1.2.2. fixed this issue.  The option to enable XAuth is now in the Tunnel setup GUI. Client version still at 5.6.0.

[philiboucher]

For me I reinstall 5.6.0 and not I don't see username/password on the client. I have EMS 1.2.2. I already change XAuth in each tunnel.

[Phuoc_Ngo]

We experience the same issue.  Open up a case with support and support confirmed there is a known bug on EMS configuration for IPsec.

Below is the support statement and bug number for version 1.2.2

"we seen a bug 0439370 reported for not able to seeing username on Forticlient for ipsec connection as configuration sent through EMS. "

If you are able to enable xAuth through the XML, can you point us to the correct XML field?

Thanks,