- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiClient
Dear People,
I created 2 IPSEC VPN Tunnel (Remote Access) with different settings.
Only the first createt tunnel does function.
The second VPN Tunnel does function only if I disable the Interface from first Tunnel.
Whats wrong:-)
Both VPN Tunnel does function if I use different WAN Outgoing connections (different WAN IP).
- Labels:
-
FortiClient
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hey Kaplan,
with multiple IPSec tunnels on the same interface, FortiGate needs some kind of indication to select the correct tunnel.
Check these links regarding peertype configuration:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dia...
https://community.fortinet.com/t5/Fortinet-Forum/Multiple-IPSec-tunnels-on-single-interface/m-p/4459...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear Debbi
thax again. You are the best. I gave the second IPSEC Connection a peer ID.
Now I can use both of them.
Kind Regards
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Try to use peer id and local id.
Thanks