Dear People,
I created 2 IPSEC VPN Tunnel (Remote Access) with different settings.
Only the first createt tunnel does function.
The second VPN Tunnel does function only if I disable the Interface from first Tunnel.
Whats wrong:-)
Both VPN Tunnel does function if I use different WAN Outgoing connections (different WAN IP).
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hey Kaplan,
with multiple IPSec tunnels on the same interface, FortiGate needs some kind of indication to select the correct tunnel.
Check these links regarding peertype configuration:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-use-Peer-IDs-to-select-an-IPSec-dia...
https://community.fortinet.com/t5/Fortinet-Forum/Multiple-IPSec-tunnels-on-single-interface/m-p/4459...
Dear Debbi
thax again. You are the best. I gave the second IPSEC Connection a peer ID.
Now I can use both of them.
Kind Regards
Hi,
Try to use peer id and local id.
Thanks
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1593 | |
1045 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.