When will there be an ARM64 Windows 11 version of the FortiClient VPN client be available?
I'm technical consultant working for many customers with many different VPN solutions. I'm using Windows under a Parallels Desktop VM to access those systems on a Macbook pro.
Now I switched to a new Macbook Pro with Apple M1 cpu which has an ARM64 architecture. So I'm now on Windows 11 ARM version. Cisco is the only VPN client (and those on virtual desktops) which is working in this constellation. I tried the 32 and 64 bit versions of the current windows FortiClients, none is working.
I think there has to be a new ARM Windows version with a new tap-module to solve the problem.
Has anyone a clue?
Best regards
Frank
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Still not working. The install stops about 75% of the way, then rolls back and says the install was stopped "prematurely". The work-around, if that's what you want to call it, is to install the VPN for Mac. Once connected, the Windows VM can connect through the VPN running on the Mac side.
Unfortunately, the Microsoft Store app does not work properly when some details are used as a different port.
So, It is still not working.
I have a W11 ARM VM on VMware Fusion w/ FortiClient installed on a Mac Air M1, works just fine.
I am using the Parallels than VMWare. But, just to check, can you share the link to the version of the app that are you using for it?
FortiClient v1.0.1041
in Windows Store: 1.0.1041.0
I am using FortiClient v1.0.1041 in a Virtual PC (via Parallels Desktop) on a Mac with M1 processor.
The structure of the M1 processor means that Windows 11 can only be used as an ARM version. In this Windows, the FortiClient can only be loaded from Windows Store.
It must be said that the Virtual PC is considered subordinate in the network (due to technical reasons) and therefore FortiClient cannot be accessed from MacOS in Windows active.
Some applications go more elegantly on Windows (SAP for example) and for some applications it does not matter. Therefore, for such cases I have installed FortClient 7.0.7.0245 for Mac OS. If this is active, both OS (Mac OS and Windows OS) can access the VPN.
The disadvantage of the Mac version is that since version 7 the config is encrypted and therefore you can not set that the password can be saved.
The disadvantage of the Windows ARM version is, it deactivates itself in sleep mode, select params in the advanced settings make sense, and it must be selected whether the VPN is used in private / public networks.
For the Windows ARM version, the traditional client is not available in the console, but the Windows system settings can be used, where you can let off steam.
See screenshots
.
Good morning,
My dear, do you know any Solutions for this issue, I just have the same problem.
I appreciate any help or comment.
Thank you!
Well... I could get the app works correctly only using the FortiClient from Windows Store. It has not worked when I installed the app downloaded from the web site.
You can try to use different variations on the "Server name or Address", like:
https://yourvpnserver.com
http://yourvpnserver.com
https://yourvpnserver.com?ice=1
and others.
Thankyou Edmilson,
I try to use FortiClient from Microsoft Store, but I can't Setting, I used the guide prensent in the forun...
What is the error that I get?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1640 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.