- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiClient and WireGuard
Hi,
The WireGuard server is working fine (Debian PiVPN). Clients can connect from Windows and Android. However, on one computer (Windows) where another VPN FortiClient (7.2.2.0864) is installed, the WG client does not work. The Handshake occurs, but there is no connection to the WG server (ping does not work).
Disconnecting FortiClient does not change the situation. There is no additional Firewall on that Windows PC. I disabled Windows Defender - nothing changed.
Is it possible to have FortiClient and WG client running on the same computer?
- Labels:
-
FortiClient
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As I know WireGuard is a VPN client and practically you can't use two VPN clients simultaneously on a host. In theory you can but it will mess up the routing table, split tunnel is mandatory to be used on both VPNs and the logical interface on the OS should not overlap.
If you have found a solution, please like and accept it to make it easily accessible for others.
