HI,
I'm using FortiClientVPN version 7.2.4.0972 for windows systems to make an SSL-Ipsec connection, and everything works fine.
I can't figure out if there is a possibility to start the connection via CLI or Batch files.
Here in the community I read a post about it where they recommended using the following command:
- FortiSSLVPNclient.exe connect -s MyCompanyName i -m -q (No Certificate)
- FortiSSLVPNclient.exe connect -s MyCompanyName -c FCT.net:earth-EARTH-CA -i -m -q (with Certificate)
I tried but the software starts automatically but not the connection, so you need to click on Connect and Disconnect.
I would like to do just that from CLI.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Have a look at the output of "route print" and determine what traffic is being routed down the VPN tunnel when you're connected. It could either be a full-tunnel, wherein all your traffic is routed down the tunnel, or it could be a split-tunnel wherein only the address ranges reachable via the VPN are routed down the tunnel https://vidmate.onl/ .
Hello,
This is the Article that it is explaining the CLI option:
https://community.fortinet.com/t5/FortiClient/Technical-Tip-How-to-use-FortiClient-SSL-VPN-from-the-...
If still doesn't work, maybe the FCT logs should provide more information.
BR
Hi @Cristiano_,
Those commands will prompt for username and password as you didn't provide them. You can use the following commands instead:
FortiSSLVPNclient.exe connect -s name -h 192.168.10.2:10443 -u guest:vpn123 -i -m -q
For more information, please refer to https://community.fortinet.com/t5/FortiClient/Technical-Tip-How-to-use-FortiClient-SSL-VPN-from-the-...
Regards,
Yes, I actually followed the same guide.
I'm trying with a certificate-only profile
Then the command FortiSSLVPNclient.exe connect -s MyCompanyName -c FCT.net:earth-EARTH-CA -i -m -q (with Certificate)
it should be the correct one, but the connection does not start automatically.
I have to be the one to click Connect.
Another thing I noticed... is that I don't have FortiSSLVPNclient.exe but FortiClient.exe
Could this be the problem?
Please make sure you are using FortiSSLVPNclient.exe. As I mentioned, if you want to be able to connect directly from the CLI without having to click connect, you must provide the credentials in the CLI. If you are using certificate, you need to provide username, password, and certificate. For example:
FortiSSLVPNclient.exe connect -s name -h 192.168.10.2:10443 -u guest:vpn123 -c FCT.net:earth-EARTH-CA -i -m -q
Regards,
Try adding --auto flag to establish VPN connections seamlessly via CLI. Here's a modified example:
FortiSSLVPNclient.exe connect --auto -s MyCompanyName [-c FCT.net:earth-EARTH-CA] (-i | -nc) -m -q
This might initiate automatic connections right after launching instead of requiring manual intervention. Ensure compatibility across different versions before implementing changes. Happy exploring like this https://seasonalholidaysinn.com/ !
nothing, I can only get this page to open.
But then nothing starts without my clicking on (connect)
I think the problem is that in the free version there is no executable (FortiSSLVPNclient.exe) and therefore the CLI commands work halfway
Inside FortiClientTools_7.2.4.0972 there is no SSLVPNcmdline folder.
In which version can I find it?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1633 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.