Hi,
Bit of a newbie, please be kind :)
In our office, we use IPSec VPN for users to tunnel into our office network, to enable users to WFH. We have a few users who have reported that their FortiClient VPN clients (Windows 10 clients) credentials have started disappearing randomly.
What I have narrowed down so far -
1. Client attempts a connection, but cancels the attempt before the OTP is keyed in (or before the connection is completed)
2. Client either shuts down or restarts their computer while the VPN connection was "ON".
3. Client system's Windows update happens and it restarts the laptop or desktop even though the VPN was disconnected, the VPN client loses the user credentials.
4. In a few random instances, it just disappears for no reason what-so-ever.
We have upgraded all the clients to use FortiClient v7.0.2.0090 for connecting into the office, to reduce any cross-version compatibility issues.
FortiClient installation path (C:\Program Files\FortiClient) and FortiClient binaries have already been added to antivirus exclusion paths (Kaspersky/Microsoft Defender).
However, The credentials still randomly disappear.
Any other suggestion? Or any possible solutions?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Are the user credentials disappearing in Foriclient 7.0.2 or the version you upgraded from?
The credentials were disappearing in older versions too. But the frequency has increased in the past two or three months.
Thinking it could have been something to do with older versions, etc, I upgraded all the users to 7.0.2.0090, however, it still keeps happening.
When you say the credentials are disappearing are you talking about the vpn tunnel configuration disappearing?
I would check your EMS server configuration. If you have multiple EMS servers check that clients are not registered on another EMS server.
I have seen something similar where clients are registered on different EMS servers. When they are on line their config changes based on which EMS sends them an update.
You should also check and remove any remembered EMS servers on the client that are not relevant.
Hi, No EMS servers here :) We're using the "free" version of the FortiClient VPN client.
And not the entire tunnel config, just the VPN Username and VPN password keeps disappearing.
I have not used the free version but I assume you have configured save login and password
You can export the config and then check that the setting is actually applied.
If not you can set in the xml file and then restore the config and test again
Created on 12-13-2021 12:53 AM Edited on 12-13-2021 01:53 AM
Yup, it's configured to save login and password. I have noticed, however, when the client "forgets" the credentials, if i go to the registry key HKCU\Software\Forticlient\IPSec\Tunnels\<tunnel_name>, the "save_username" key is always 0 and however many times change it to 1 and restart, the setting changes to 0.
Edited for clarity using italics.
i Have this same problem now.
FortiClient VPN 7.2.4.0972.
Can't save password or login.
Im doing tricks with windows registry and with backup conf fortigate file.
Nothing works. After disconecting from SSL connection all settings rest to defaults 0
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.