FortiClient : On-Fabric / Off-Fabric when network issue

[zoriax]

Hello,

I have a very strange behavior with FortiClient (version 7.0.7 and EMS 7.0.7).

Let me explain :

I have an on/off fabric detection rule (test on Local IP/Subnet) and an auto-connect when off fabric When I'm Off-Fabric and my VPN starts connecting, if I suddently remote the network link during the process and reconnect it on an On-fabric network, my VPN continues the connection and finally I'm connected when I'm On-Fabric and it's not what I'm expected !

In my profile, I don't have the keep_running directive enable so for me when my netowrk cable is diconnected, the connection steps should stop.

How can I solve this ?

[Anthony_E]

Hello zorax,

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Regards,

[Anthony_E]

Hello zorax,

I am still looking for a solution.

Meanwhile, I have found this document:

https://docs.fortinet.com/document/forticlient/7.0.1/ems-administration-guide/303940/on-fabric-detec...

Could you please tell me if it helps?

Regards,