Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
howardsinc
New Contributor

FortiClient Latest Version - SSL VPN - Stops at 98% or disconnects right after logon

FortiClient Lastest Version - SSL VPN - Stops at 98%

 

Ok guys.. This is what I got going on.

 

I have tested the FortiClient on 3 separate windows 8.1 pro machines and the same results. The status goes to 98% and stops and/or flashes connected and then drops off.

 

IPV6 is disabled on all adapters

The CISCO VPN client has been removed and machine rebooted, then new download and install of the FortiClient. Installed as VPN only

 

The issue is persisting. Please note, there is not issue with Windows 8.1 (non pro) machines.

 

Also This connections does not have dual WAN. If I come across the solution I will update this post.

 

Thanks

JNCIA, CCNP R/S, NSE4 , NSE7, Associate of (ISC)²

JNCIA, CCNP R/S, NSE4 , NSE7, Associate of (ISC)²
0 REPLIES 0
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors