Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ScottDanesi
New Contributor

FortiClient Immediate Disconnects

Hello Group, I am having trouble with my FortiClient software. As soon as I connect to our VPN, the software says connected and then immediately says disconnected. My credentials are correct and others are able to access from other laptops without issues. My Environment Info: Client PC OS: Windows 8 FortiClient Version: 4.3.5.472 FortiNet Hardware: 200B Firmware Version: 5.0 SP3 I have tried to uninstall FortiClient and re-install with a system reboot in between without any luck. Has anyone seen this behavior before? Thank you very much,
--Scott
--Scott
29 REPLIES 29
rwpatterson
Valued Contributor III

Welcome to the forums. For troubleshooting purposes, I would try 2 things: 1) Log in with your user (or the failing one) from a working laptop 2) Have a working user login from the non-working laptop This way you can figure out if the problem lies in the user or the software installation. Hope that helps.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
ScottDanesi
New Contributor

Hey Bob, Thank you for the quick reply. I just tried logging in on a working machine and my ID stays connected just fine. I also had a known working user log in on my machine and it connected and disconnected immediately. Very strange. Anything else I should try? Thank you,
--Scott
--Scott
Rick_H
New Contributor III

I had some occasional issues with the 4.3 FortiClient on Windows8. Have you tried using a 5.0 FortiClient instead?
Dipen
New Contributor III

Hi So its definitely an VPN Client issue on your specific laptop. At what percentage does the connection disconnect..This will narrow the the issue. Have you tried accessing the SSL-VPN using the browser. Are you able to login to SSL-VPN browser CHECK the settings of fortissl VPN adapter. Phone No should be 1

Ahead of the Threat. FCNSA v5 / FCNSP v5

Fortigate 1000C / 1000D / 1500D

 

Ahead of the Threat. FCNSA v5 / FCNSP v5 Fortigate 1000C / 1000D / 1500D
ScottDanesi
New Contributor

Hey Rick, I just tried uninstalling version 4 and re-installing version 5. Unfortunately, I am still getting the same results. The connection will look like it is connecting and then it immediately disconnects. Very strange.
--Scott
--Scott
Rick_H
New Contributor III

Have a look in your system logs on the Win8 box. See if they give you any clue as to why it is clamping off the connection. Also, do you have any host-based firewall or IPS enabled? If so you might check those to see if they give you any information.
ScottDanesi
New Contributor

This may shed some light on the issue. My Windows Firewall is disabled. FortiClient Log:
7/12/2013 1:00:24 PM Notice Update id=96825 msg=" Update successful, Forticlient_Version:5.0.4.276 AV_SIG:17.907 AV_EXT_SIG:17.867 MDARE_SIG:1.0 APP_SIG:4.365 VULN_SIG:1.320 AV_ENGINE:5.146 MDARE_ENGINE:2.032" 7/12/2013 3:36:41 PM Error VPN FortiSslvpn: 9060: Ras : connection to fortissl failed : 720:6:A connection to the remote computer could not be established. You might need to change the network settings for this connection. 7/12/2013 3:36:50 PM Notice VPN date=2013-07-12 time=15:36:49 type=traffic level=notice sessionid=26200112 hostname=SDANESI uid=6C3C6CCE8F754626A7A30B7FB93CB3F8 devid=FCT8004234230634 fgtserial=N/A regip=N/A srcname=sslvpn srcip=N/A srcport=26199856 direction=outbound remoteip=bostondcfw.pelotongroup.com remotename=N/A remoteport=26199728 url=N/A user=sdanesi proto=ssl rcvdbyte=0 sentbyte=0 utmaction=passthough utmevent=vpn threat=connect vd=N/A 7/12/2013 3:36:50 PM Notice VPN date=2013-07-12 time=15:36:49 type=traffic level=notice sessionid=26200112 hostname=SDANESI uid=6C3C6CCE8F754626A7A30B7FB93CB3F8 devid=FCT8004234230634 fgtserial=N/A regip=N/A srcname=sslvpn srcip=N/A srcport=26199856 direction=outbound remoteip=bostondcfw.pelotongroup.com remotename=N/A remoteport=26199728 url=N/A user=sdanesi proto=ssl rcvdbyte=0 sentbyte=0 utmaction=passthough utmevent=vpn threat=disconnect vd=N/A
--Scott
--Scott
ScottDanesi
New Contributor

Hello, I have read online a few articles about disabling IPv6, but this has not resolved this issue. Here is the error message that I am getting in my log that concerns me.
8/26/2013 12:52:55 PM Notice FortiShield id=96851 user=DBLOG_SOURCE_SYSTEM msg=" FortiShield is enabled" 8/26/2013 12:52:58 PM Notice VPN id=96602 msg=" SSLVPN service started successfully." 8/26/2013 12:53:02 PM Warning FortiShield id=96855 msg=" FortiShield blocked application: FortiClientIns from modifying: \\REGISTRY\\MACHINE\\SOFTWARE\\Wow6432Node\\Fortinet\\FortiClient\\FA_UPDATE\\SoftwareUpdate\\IgnoreVersion" 8/26/2013 12:53:50 PM Error VPN FortiSslvpn: 6544: Ras : connection to fortissl failed : 720:6:A connection to the remote computer could not be established. You might need to change the network settings for this connection. 8/26/2013 12:53:59 PM Notice VPN date=2013-08-26 time=12:53:58 type=traffic level=notice sessionid=26200112 hostname=SDANESI uid=6C3C6CCE8F754626A7A30B7FB93CB3F8 devid=FCT8004234230634 fgtserial=N/A regip=N/A srcname=sslvpn srcip=N/A srcport=26199856 direction=outbound remoteip=vpn.pelotongroup.com remotename=N/A remoteport=26199728 url=N/A user=sdanesi proto=ssl rcvdbyte=0 sentbyte=0 utmaction=passthough utmevent=vpn threat=connect vd=N/A 8/26/2013 12:53:59 PM Notice VPN date=2013-08-26 time=12:53:58 type=traffic level=notice sessionid=26200112 hostname=SDANESI uid=6C3C6CCE8F754626A7A30B7FB93CB3F8 devid=FCT8004234230634 fgtserial=N/A regip=N/A srcname=sslvpn srcip=N/A srcport=26199856 direction=outbound remoteip=vpn.pelotongroup.com remotename=N/A remoteport=26199728 url=N/A user=sdanesi proto=ssl rcvdbyte=0 sentbyte=0 utmaction=passthough utmevent=vpn threat=disconnect vd=N/A
--Scott
--Scott
ScottDanesi
New Contributor

Hey there, I will get to 98% just fine and from there it looks like it freezes up and then says in the system tray that forticlient is connected, it then immediately says that forticlient is down and the connect button reappears. I am not able to use the web as we do not have this set up. I checked the adapter and the phone number is set to 1. I have also tried completely uninstalling forticlient and scanning the registry and removing all traces of forticlient or fortinet then reinstalling with no luck. Thank you very much for the help in trying to fix this, --Scott
--Scott
--Scott
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors