Hi
We have run a test with a FortiClient 6.2.2 on Windows 10 1903 Enterprise german. We noticed that the network throughput was no longer at about 100MB per second, but at about 15MB per second.
After some testing, we are back on the machine at 6.2.1 and behold the performance is back at 100MB.
Has anyone of you have similar experiences?
Regards,
Andy
Fortigate 500E HA Fortimail 200 Fortimanager
FortiEMS
FortiSandbox 1000D
FortiSwitch Network Some other Models in use :-) ---------------------------------------------------- FCSE ----------------------------------------------------
We have noticed slow network performance on a few applications since upgrading to 6.2.2. Were you able to figure out a solution?
We have the same problem. After upgrading from 6.2.1 to 6.2.2 all the clients are suffering from slow network performance.
[ul]We have tried creating a policy with all modules disabled (including sandbox) and the perfomance is still slow. Going back to 6.2.1 or 6.0.9 "solves" the problem.
Is Fortinet aware of this issue?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1740 | |
1108 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.