FortiAuthenticator OIDs

[fvazquez]

Hello, everyone

Does anyone know where can I find the official documentation for FortiAuthenticator's OID lists? I am aware there are two MIB files you can download from the SNMP configuration page in FAC but for some reason it is not getting any CPU metrics while sensing via PRTG.

Thank you!

[aahmadzada]

Hi,

I believe the CPU usage OID for FAC is 1.3.6.1.4.1.12356.113.1.4

Please check this link as well:

http://www.circitor.fr/Mibs/Html/F/FORTINET-FORTIAUTHENTICATOR-MIB.ph...

Ahmad

[fvazquez]

Hello, Ahmad

Thank you for your answer. I've tried running snmp tests with the OID you mentioned but it still generates the "SNMP Datatype: SNMP_EXCEPTION_NOSUCHOBJECT" error. Also with several more of the OIDs that are listed in the link you shared... So, there was no luck at all.

Felipe

[fvazquez · Accepted solution]

Hi all.

After some makes and mistakes I was able to get the right OIDs. I used Paessler MIB Importer to get the OIDs from the MIB files you download from the SNMP section in the FortiAuthenticator menu. Here are some of the ones I used, in case you need them:

• fac sys model                 1.3.6.1.4.1.12356.113.1.1.0
• fac sys serial                   1.3.6.1.4.1.12356.113.1.2.0
• fac sys version               1.3.6.1.4.1.12356.113.1.3.0
• fac sys cpu usage          1.3.6.1.4.1.12356.113.1.4.0
• fac sys mem usage        1.3.6.1.4.1.12356.113.1.5.0
• fac sys log disk usage   1.3.6.1.4.1.12356.113.1.6.0
• fac ha current status     1.3.6.1.4.1.12356.113.1.201.1.0
• fac forti token remaining   1.3.6.1.4.1.12356.113.1.202.6.0
• fac auth user count            1.3.6.1.4.1.12356.113.1.202.1.0
• fac auth events5mins        1.3.6.1.4.1.12356.113.1.202.21.0

The remaining ones can be obtained with both MIB files I mentioned earlier