Hello, everyone
Does anyone know where can I find the official documentation for FortiAuthenticator's OID lists? I am aware there are two MIB files you can download from the SNMP configuration page in FAC but for some reason it is not getting any CPU metrics while sensing via PRTG.
Thank you!
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi all.
After some makes and mistakes I was able to get the right OIDs. I used Paessler MIB Importer to get the OIDs from the MIB files you download from the SNMP section in the FortiAuthenticator menu. Here are some of the ones I used, in case you need them:
The remaining ones can be obtained with both MIB files I mentioned earlier
Hi,
I believe the CPU usage OID for FAC is 1.3.6.1.4.1.12356.113.1.4
Ahmad
Hello, Ahmad
Thank you for your answer. I've tried running snmp tests with the OID you mentioned but it still generates the "SNMP Datatype: SNMP_EXCEPTION_NOSUCHOBJECT" error. Also with several more of the OIDs that are listed in the link you shared... So, there was no luck at all.
Felipe
Hi all.
After some makes and mistakes I was able to get the right OIDs. I used Paessler MIB Importer to get the OIDs from the MIB files you download from the SNMP section in the FortiAuthenticator menu. Here are some of the ones I used, in case you need them:
The remaining ones can be obtained with both MIB files I mentioned earlier
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1705 | |
1093 | |
752 | |
446 | |
230 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.