Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Elkomy
New Contributor II

FortiAuthenticator HA issue

Hello,

i have an issue on FortiAuthenticator HA on virtual machine,

when trying to create HA Active-Passive between two virtual machine the HA status on the two nodes become primary with one has high priority and the second has low priority but no sync happen between the both devices

i have attached a copy of the config of the ha setting on both devices Screenshot 2024-11-28 105359.png

Screenshot 2024-11-28 105136.pngScreenshot 2024-11-28 105221.pngScreenshot 2024-11-28 105302.png

1 Solution
sjoshi

detail about FAC VM license can be found here

https://community.fortinet.com/t5/FortiAuthenticator/Technical-Tip-FortiAuthenticator-VMs-HA-license...

Let us know if this helps.
Salon Raj Joshi

View solution in original post

14 REPLIES 14
Elkomy
New Contributor II

when try to enable ha i got this warning does it refer to anything may cause the issue Screenshot 2024-12-01 122809.png

sjoshi

you got this error while enabling the ha on vm device or the hardware?

Let us know if this helps.
Salon Raj Joshi
Elkomy
New Contributor II

on the vm i have noticed that the the ha has prerequisite as valid license for ha does this correct ?

sjoshi

detail about FAC VM license can be found here

https://community.fortinet.com/t5/FortiAuthenticator/Technical-Tip-FortiAuthenticator-VMs-HA-license...

Let us know if this helps.
Salon Raj Joshi
Elkomy
New Contributor II

@sjoshi      thank you very much it was helpful document

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors