Hi,
i don't get a connection from the FortiGate to the FortiAnalyzer.
I have following architecture:
A "Test-Fortigate" with the IP 192.168.178.244. It has the FIrmware v.5.6.2 buld1486 on it.
I have "FortiAnalyzer-VM" with the IP 192.168.178.239. It has the Firmware v.5.6.0-build1557 on it.
And I have a "FortiGate HA-cluster" with IPs 192.168.178.1, 192.168.178.2, 192.168.178.3 and Firmware v.5.4.2,build1100 on it.
From the Test FortiGate i get a connection to FortiAnalyzer. Under settings i enable FortiAnalyzer Logging and added the IP 192.168.178.239 from the FortiAnalyzer.
On the FortiAnalyzer I get the "Unknown Device" Message and added the "Test-Fortigate". The "Test-FOrtigate" is sending data to the FortiAnalyzer. It works well.
But with the "FortiGate HA-Cluster" this procedure doesn't work. I don't get the "Unkown Device" Message. So I added the Device over the Device Manager manually. I toke "Add Device" and take the IP-Address 192.168.178.1 with Firmware VErsion 5.4.
When I go "next", the Device will be add, but at "Retrieving HA-Status" he is working. So I get on "Finish" and add the HA-Cluster manually. But the Logging don't work.
Over CLI I get a Ping from FortiAnalyzer to FortiGate HA-Cluster. And from FortiGate HA-Cluster I get a Ping to FortiAnalyzer.
Does anyone know this problem and can help me.
Thank you
Kind regards
Tobias
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
i have added the VDOMS and i get a connection from the HA-Cluster. But Only from the Second (inactive) Cluster. There is under System Events "Connected to FortiAnalyzer 192.168.0.239" = Connect = success.
Under the primary (active) Cluster is under system Events "Failed to connect FortiAnalyzer 10.146.0.239" -> failure -> connect failed: Connection timed out.
Does anyone know, why?
Thank you
Kind Regards
Tobias
Hi Tobias,
The HA-Cluster have more than one vdom (root) ?
If so, you have to check which one is the management vdom and assure that the connectivity with FortiAnalyzer is made from that vdom.
Regards
Radu
Hi Radu,
it works.
Thank you a lot.
Kind regards
Tobias
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1713 | |
1093 | |
752 | |
447 | |
231 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.