Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Upendra
New Contributor

FortiAnalyzer Custom IPSec Client VPN Report

Hello Sir,

Can anybody help to create IPSec Client VPN Report as per attached screenshot.

Regards

Upendra Makwana.

 

1 Solution
hzhao_FTNT

It depends on your FGT settings. Please go to FortiView-> Event->VPN, search action=tunnel-stats, if you can see results there, then your report results should be accurate. Otherwise, FAZ will only count the total bytes when "action=tunnel-down". For example, if the tunnel was up 7 days ago and down yesterday, and your report period is yesterday, then it will show 7 days total bytes on your report.

To enable tunnel-stats VPN log, pls run below CLI on FGT: config system settings set vpn-stats-log ipsec ssl set vpn-stats-period 300 end

 

Kamal9 wrote:

Thank you very much for the query, it's work perfectly, but it is normal to get very big bandwidth like what i have in the screen shot ?

View solution in original post

19 REPLIES 19
hzhao_FTNT
Staff
Staff

Hi Upendra,

The report you desired looks like based on per session? Since each user could log in/out several time per day, it make more sense if we use start_time/end_time to record first/last seen time. Besides, Some fields like "mac address" are not available in event log. Below dataset will give you dial-up ipsec user info with start/end time, duration, bandwidth usage info.

select coalesce(xauthuser_agg, user_agg) as user_src, remip, from_dtime(min(s_time)) as start_time, from_dtime(max(e_time)) as end_time, sum(duration) as duration, sum(bandwidth) as bandwidth, sum(traffic_in) as traffic_in, sum(traffic_out) as traffic_out from (select devid, vd, remip, string_agg(distinct xauthuser_agg, ' ') as xauthuser_agg, string_agg(distinct user_agg, ' ') as user_agg, tunnelid, min(s_time) as s_time, max(e_time) as e_time, (case when min(s_time)=max(e_time) then max(max_duration) else max(max_duration)-min(min_duration) end) as duration, (case when min(s_time)=max(e_time) then max(max_traffic_in)+max(max_traffic_out) else max(max_traffic_in)-min(min_traffic_in)+max(max_traffic_out)-min(min_traffic_out) end) as bandwidth, (case when min(s_time)=max(e_time) then max(max_traffic_in) else max(max_traffic_in)-min(min_traffic_in) end) as traffic_in, (case when min(s_time)=max(e_time) then max(max_traffic_out) else max(max_traffic_out)-min(min_traffic_out) end) as traffic_out from ###(select devid, vd, remip, nullifna(`xauthuser`) as xauthuser_agg, nullifna(`user`) as user_agg, tunnelid, min(coalesce(dtime, 0)) as s_time, max(coalesce(dtime, 0)) as e_time, max(coalesce(duration,0)) as max_duration, min(coalesce(duration,0)) as min_duration, min(coalesce(sentbyte, 0)) as min_traffic_out, min(coalesce(rcvdbyte, 0)) as min_traffic_in, max(coalesce(sentbyte, 0)) as max_traffic_out, max(coalesce(rcvdbyte, 0)) as max_traffic_in from $log where $filter and subtype='vpn' and tunneltype like 'ipsec%' and not (tunnelip is null or (tunnelip='0.0.0.0' and coalesce(logver, 0)!=52)) and action in ('tunnel-stats', 'tunnel-down', 'tunnel-up') and tunnelid is not null group by devid, vd, remip, xauthuser_agg, user_agg, tunnelid order by tunnelid)### t group by devid, vd, remip, tunnelid) tt group by user_src, remip having sum(bandwidth)>0 order by duration desc

 

Regards,

hz

Upendra
New Contributor

Dear Sir,

Works, Thanks a lot.

Can we get destination ip also. (Which IP Address of LAN Network Client VPN User had Access?)

Regards

Upendra Makwana.

 

 

Fullmoon

 

 

I tried to copy paste the syntax above in my dataset but when click the test button "No Data" appeared. Any  guess?

Fortigate Newbie

Fortigate Newbie
hzhao_FTNT

Hi, did you set log type to event? I modified this dataset from upcoming 5.2.2, and it will use action in both tunnel-up/down and tunnel stats. I have tested it OK with FOS 4.3/5.0/5.2 log on FAZ5.2.1.

Fullmoon wrote:

 

 

I tried to copy paste the syntax above in my dataset but when click the test button "No Data" appeared. Any  guess?

Fullmoon

hzhao_FTNT wrote:

I tried to copy paste the syntax above in my dataset but when click the test button "No Data" appeared. Any  guess?

Pls see the attached file. Im not sure if the syntax is case sensitive

Fortigate Newbie

Fortigate Newbie
hzhao_FTNT

Please go to FortiView->Log View->Event->VPN and check if you can see logs there. If you can, then try to filter logs by action=tunnel-down or action=tunnel-stats, remember choose correct time period and set "limit" to "All" in the bottom. If you can't see any logs there, pls check your FGT settings.

 

Fullmoon wrote:

hzhao_FTNT wrote:

I tried to copy paste the syntax above in my dataset but when click the test button "No Data" appeared. Any  guess?

Pls see the attached file. Im not sure if the syntax is case sensitive

hzhao_FTNT

This field is not available in event log. Pls try other predefined dataset with traffic log type.

Upendra wrote:

Dear Sir,

Works, Thanks a lot.

Can we get destination ip also. (Which IP Address of LAN Network Client VPN User had Access?)

Regards

Upendra Makwana.

 

 

Upendra
New Contributor

Hi hzhao

Please help to create Dataset (Query) as per attached format.

 

Regards

Upendra Makwana.

hzhao_FTNT

Hi Upendra,

 

From your screenshot, "Date" is not a good choice, since start/end time could not be the same day, and user can get enough info from start/end time. Besides, MacID/DST ip/ location are not available in event log. 

For your second chart, up/down time is not recommend. For example, if you select "Yesterday" as report period, but there is one VPN connect: tunnel-up time is the day before yesterday, and tunnel-down time is today.  You will not able to see any records for this connection in your report.

Try below dataset:

select outintf as PORT, from_dtime(min(s_time)) as "Start time", from_dtime(max(e_time)) as "End time", sum(duration) as duration, sum(bandwidth) as usage, remip as "LogIN Source IP" from (select outintf, remip,  tunnelid, min(s_time) as s_time, max(e_time) as e_time, (case when min(s_time)=max(e_time) then max(max_duration) else max(max_duration)-min(min_duration) end) as duration, (case when min(s_time)=max(e_time) then max(max_traffic_in)+max(max_traffic_out) else max(max_traffic_in)-min(min_traffic_in)+max(max_traffic_out)-min(min_traffic_out) end) as bandwidth, (case when min(s_time)=max(e_time) then max(max_traffic_in) else max(max_traffic_in)-min(min_traffic_in) end) as traffic_in, (case when min(s_time)=max(e_time) then max(max_traffic_out) else max(max_traffic_out)-min(min_traffic_out) end) as traffic_out from ###(select outintf, tunnelid, remip, min(coalesce(dtime, 0)) as s_time, max(coalesce(dtime, 0)) as e_time, max(coalesce(duration,0)) as max_duration, min(coalesce(duration,0)) as min_duration, min(coalesce(sentbyte, 0)) as min_traffic_out, min(coalesce(rcvdbyte, 0)) as min_traffic_in, max(coalesce(sentbyte, 0)) as max_traffic_out, max(coalesce(rcvdbyte, 0)) as max_traffic_in from $log where $filter and subtype='vpn' and tunneltype like 'ipsec%' and not (tunnelip is null or (tunnelip='0.0.0.0' and coalesce(logver, 0)!=52)) and action in ('tunnel-stats', 'tunnel-down', 'tunnel-up') and tunnelid is not null group by remip, outintf, tunnelid order by tunnelid)### t group by remip, outintf,tunnelid) tt group by outintf, remip having sum(bandwidth)>0 order by duration desc

 

regards,

hz

 

Upendra wrote:

Hi hzhao

Please help to create Dataset (Query) as per attached format.

[attachImg]https://forum.fortinet.com/download.axd?file=0;121959&where=message&f=omega.jpg[/attachImg] 

Regards

Upendra Makwana.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors