Hi,
we updated a FG80E to 7.4.3 (also before with 7.4.X) and since than we have problems with 2 FortiAPs 221E which worked fine for years under 6.4.X.
We never had an issue with them, but after update to 7.4 (both, FGCluster and FPs) we have the problem that after 1-2 days they just dont work and we dont see them under managed FortiAPs. We have to reboot them and than it works fine for 1-2 days....that has happened like this now for 3-4 times.
Is there a known bug with 7.4.X for the APs? Anything we can check?
Thanks!
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Created on 03-04-2024 12:20 AM
Hi,
we just have one FortiAP down again. We can access via web but on the FG it shows down. So again restart and OK.
This seams to be a bug in 7.4.2, no?
Thanks
I have seen this issue multiple times for low-end devices. I don't think this is a bug.
The management traffic of FortiSwitch and FortiAP always breaks down time and again. It will only be established after reboot.
I think there is a limitation in maintaining reliable management traffic for FortiSwitch and FortiAP.
Correction is always welcome.
Kind regards,
Bijay Prakash Ghising
This seems to be a bug. We are having the same issue and found this: https://community.fortinet.com/t5/Support-Forum/AP-Fail/td-p/302730
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1660 | |
1077 | |
752 | |
443 | |
220 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.