FortiAP solid orange power LED

[Forti-Mon]

My FortiAP is plugged into a Dell Switch and the Power LED is solid orange
The manual says 'reserved for customizations' - what does that mean?

I cannot access my AP as still shows offline on Fortigate

My AP is a 231F

My POE+ switch is an N3024EP-ON

Thanks

[ebilcari]

It may be an indication that the AP is not able to get a valid IP address from DHCP and is not able to reach the FGT. Can you verify if you see the MAC address of the AP in the switch port and is it in the right access VLAN?

Also make sure you have enabled 'Security Fabric Connection' in the interface of the FGT under 'Administrative Access'.