FortiAP new 5.4.2 firmware and DFS Support

[tanr]

There is new 5.4.2 firmware for the FortiAP line.  Has anybody tried it out?

The release notes say that it adds DFS channel support for a number of additional FAP versions, however I still don't see anything in the spec sheets about DFS certification for the USA versions of the 221C (FAP-221C-A).

The FAP spec sheet (https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/Fortinet_Wireless_Product_Matrix.pd...) still groups the 221C and 223C together and in the DFS Certified section for the 221C/223C says:

    Region E, J, T (FAP-221C)

    Region E, A, J (FAP-223C)

Note that it specifically does not list a FAP-221C in Region A (USA) as being DFS certified.

Can anyone tell me definitively if the FAP-221C-A is DFS certified?

Thanks.

[Mike_FTNT]

Yes, FAP-221C-A has been DFS certified.

Please refer to FortiAP 5.2.3 Release Notes.

[tanr]

Thanks for the confirmation.  

Please pass on the request to update the wireless product matrix to show the DFS certification for FAP-221C-A.

[Mike_FTNT]

Sure.

Thank you too.