Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Troubleshooter_73
New Contributor III

FortiAP Update 7.0.6 shows wrong Build No.?

Yesterday I've updated my LAB FortiAP (W2, 223E) to Version 7.0.6.
First Update to 7.0.5 -> FortiManager shows FP223E-v7.0-build0078 -> expected

Second Update to 7.0.6 -> FortiManager shows FP223E-v7.0-build0068 -> quiet unexpected?

 

I thought I've made a mistake during updating, downloaded Image "FAP_223E-v700-build0108-FORTINET.out" and tried to update directly by the AP GUI -> same issue?

 

Double Check:

I've edited Firmware Image by an Editor and the file header shows "FP223E-7.00-AP-build0108-230329-patch06-protver02".

 

Anybody updated to the new Firmware and can agree with the right Build No. after updating a FAP Wave2?



FCNSA 5, FCNSP 5, NSE 4

FCNSA 5, FCNSP 5, NSE 4
1 Solution
Troubleshooter_73
New Contributor III

Sorry for the late answer but we detected, we're running into this issue.
https://community.fortinet.com/t5/FortiAP/Technical-Tip-FortiAP-rolls-back-to-old-firmware-even-afte...
The update was successful at all, so we were confused about the Version. :)

Following the Technical Tip and we were able to update the FortiAP by FortiManager successfully.



FCNSA 5, FCNSP 5, NSE 4

View solution in original post

FCNSA 5, FCNSP 5, NSE 4
4 REPLIES 4
Anthony_E
Community Manager
Community Manager

Hello,


Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Thanks,

Anthony-Fortinet Community Team.
Anthony_E
Community Manager
Community Manager

Hello,

 

We are still looking for someone to help you.

We will come back to you ASAP.


Regards,

Anthony-Fortinet Community Team.
rmittal
Staff
Staff

Hi,

I have upgraded my FAP-W2 to v700-build0108 and it seems to be showing the correct build number after the upgrade.

 

Can you please share the below output from:

 

1> From firewall cli:

execute wireless-controller list-wtp-image

 

2> From ap cli:

fap-get-status

 

Thanks

Troubleshooter_73
New Contributor III

Sorry for the late answer but we detected, we're running into this issue.
https://community.fortinet.com/t5/FortiAP/Technical-Tip-FortiAP-rolls-back-to-old-firmware-even-afte...
The update was successful at all, so we were confused about the Version. :)

Following the Technical Tip and we were able to update the FortiAP by FortiManager successfully.



FCNSA 5, FCNSP 5, NSE 4

FCNSA 5, FCNSP 5, NSE 4
Labels
Top Kudoed Authors