Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Same here.
Did you find any answare for this problem ??
I am also having the same problem. Was there a solution?
Thanks, Tim
Nothing yet. I am very disappointed about Fortinet at this point. They have no excuse for this strange issue.
I have the same problem, I tried to chat with the support and no response from them, I am disappointed
Hello, I don't know if you still need help, but the same thing happened to me and if I'm not mistaken, your problem is that I am left in boot cycle mode, you should perform the following steps:
One option is downgrading the FortiAP to 0031 or flashing a .bin image on the FortiAP which is on Build84.
Flash image on FPA running Build84 if it is going through a continuous boot cycle:
Get a .bin image from Fortinet support for the specific FortiAP model.
Make the TFTP server ready for FortiAP.
Console access ready for FortiAP.
interrupted reboot loop, enter u-boot:Hit CTRL+c to abort u-boot in 3 secon 1 fap22b1!$
Under u-boot, perform below:
u-boot> dhcp
BOOTP broadcast 1
*** Unhandled DHCP Option in OFFER/ACK: 224
*** Unhandled DHCP Option in OFFER/ACK: 224
DHCP client bound to address 68.1.1.4
u-boot>
u-boot> setenv serverip 10.105.188.205 <<------------ tftp-server
u-boot> flash_ftnt_mft_img FAP_U421EV-v7-build0132-FORTINET.bin
u-boot> reset
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1673 | |
1083 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.