Hi All,
We are setting up a new Virtual FortiGate for use as WLC, and I have enabled Advanced Wireless Features.
1: The GUI in FG 7.0.n - 7.4.2 has a time-display bug:
When running on 24-h system, editing a schedule still show time as 12-h am/pm input in the schedule editor.
Time shown in Schedule List:
Time shown in Editor:
Time shown in CLI, when editing Schedules there, is in 24h format..
2: Time Schedules does not seem to manage the FortiAP LED's?
First off: The schedule seems to control when the LED's are ON - right?
Second: When I enable LED Enable and set a schedule, it seems that the LED's does not turn on/off within the minute of the time set.
If I set a schedule, that turn off the LED's, they turn off instantly, same if I remove the schedule so the LED's turn on.
When the schedule then hit the target time to tunr on/off the LED's, it's not happening.. at least not within the same minute..
So, to understand this:
Is this schedule pushed to the AP's and they individually handle the schedule, or is this managed by the FG/WLC?
It seems a bit 'flacky' at the moment.. and we REALLY would like this to work on a new hotel installation :)
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Update:
FortiAP's does not have any local scheduler, so all these are handled by the FortiGate/Manager.
Make sure it's in the right time zone and time is in sync (obviously..)
The GUI of the 'time picker' does not follow the system time zone/localization: 'bug'.
Ok, quick followup!
The vFortiGate's time zone was not set correctly.. :p after setting that, it seems to work when the schedule should execute.
That also seems to point in the direction, that it's the FG that execute the schedule?
Created on 01-23-2024 07:26 AM Edited on 01-23-2024 07:31 AM
Yes, the scheduler should be run from FGT, there is no scheduled time in AP configuration, only the LED state is shown:
FortiAP-421E # cfg -s
.
LED_STATE:=2
Using the 24h format in CLI is easier, the GUI uses AM/PM to be more user friendly.
Hi @ebilcari
OK, thanks...
And no, outside the US, 12H GUI is not 'more user friendly'.. ;)
And System: Settings: show the time in 24H when you set the time zone to a 24H location..
Would be great, it the time editor in GUI is 'in sync' with the location..
Personally I would also prefer 24h format everywhere when it is related to configurations just to avoid any possible confusion, I thought you were asking to add AM/PM format support in CLI :)
Update:
FortiAP's does not have any local scheduler, so all these are handled by the FortiGate/Manager.
Make sure it's in the right time zone and time is in sync (obviously..)
The GUI of the 'time picker' does not follow the system time zone/localization: 'bug'.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1692 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.