- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
FortiAP FAP-221E
Need to install a wireless access point for use with a FortiGate 50E in a relatively small office. Will be used by about 10 people. Is the FortiAP FAP-221E a good option? Is it reliable? Is there a better option for this type of application?
Thanks,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
We haven't migrated our office from 221B+221C to 221E(2x2 MU-MIMO/Wave 2) yet. But if it's a regular wide-open office for 10 people I would say it's the first option anybody would consider. Based on our experiences with 221B+221C, the reliability is actually dictated by wifi controller (FortiGate) software side. We've experienced relatively short down time time to time (months apart) but we have some evidence it's not on FAP side.
Only concern is if there are some closed offices and only one AP is installed at the center of open area, the users in the closed offices might have weak signal problems on 5GHz when they close the doors.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
That I don't know. It's completely up to the smartphones. We intentionally set different SSIDs for 5G and 2.4G and let users to choose. 2.4GHz is so crowded in our office (lots of rogue SSIDs at all channels from nieghbors) so generally doesn't work well.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello everybody,
I'm new in FortiAP but I have already used Fortigate firewall till now.
Now I have to Install 2 fortiAP 221E with one Fortigate 50E?do we need additionnal licence if we want to manage the 2 AP with our fortigate?
Thank you.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It's a standard feature. I don't remember wireless-controller was enabled by default but likely you don't have to touch. Check with below command:
xxx-fg1 # config sys global
xxx-fg1 (global) # get | grep wireless gui-wireless-opensecurity: disable wireless-controller : enable wireless-controller-port: 5246