We plan to buy a number of newest FortiAP-321C WiFi access points to connect to different FortiGate units (all with FortiOS 5.2.2) deployed at our various locations. Unfortunately even with the latest FortiOS 5.2.2, FortiAP-321C is not available as a supported platform on a Fortigate's built-in WiFi Controller.
Does anyone know if we may specify FAP-320C platform (which seems to be close) to work with FAP-321C? Did anyone actually tried that?
VA
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
The 321C should be present on 5.2.2, what Fortigate platform are you using? Also try the following at CLI:
#config wireless-controller wtp-profile
#edit 321C_AP
#config platform
#set type 321C
#end
#end
Currently running the older wireless controller version of the 5.0.8 firmware on a 200D -- I'm going to assume these new wireless controllers were finally merged into the mainstream 5.2.x firmware. A clean/factory config should show the 321C supported under the AP profile settings.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.