Hello, everyone!
I hope you are all doing great.
We have several FortiAP-231F access points in a residency building on our campus. I created a new SSID for the building with a schedule that broadcasts the SSID after work hours.
I am also wondering if I can automate the access points power, meaning based on a schedule, they should turn off/on.
Can somebody please help?
Best regards,
Hello @sagvan ,
If you use FortiSwitch and these APs are connected to this switch, you can use automation.
If you change to switchport mode enable/disable with automation, your AP will shut down and open up.
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/453129/schedule-trigger
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/639044/cli-script-action
@ozkanaltas
Thank you for the response!
We don't have Fortiswitches, but since you provided me with the documents, I will accept your comment as solution.
User | Count |
---|---|
986 | |
821 | |
457 | |
440 | |
131 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.