Hello,
we have a problem with our FortiAPs 221E on one site.
We have there 4 APs and on each of the 4 APs the memory usage is above 70% (sometimes 71 or 72 or 75).
If I do a htop command on the AP I can see that only round about 50% of the memory is used but if I do a cw_diag sys-performance it shows me the value above 70%.
It is also very interesting that the above 70% value is not the whole day. Sometimes (mostly in the afternoon) it is below 70% but no matter if there are only 2 people connected or if there are 7 people connected to the accesspoint.
Any ideas how I can find out which process is consuming the memory or what could be the cause of the problem?
Thank you.
Best regards
René
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I checked in a FAP-421E (~ 6 clients) and the status looks similar:
FortiAP-421E # cw_diag sys-performance
Memory Usage: 73%
FortiAP-421E # htop
Mem[||||||||||||||||||||||||||||||||||||||||||||||||| 111/207MB]
Swp[ 0/0MB]
Are you facing any issue with these APs? Having this memory usage value is not an indication that something is wrong with the AP, if there is high CPU usage maybe that need to be investigated.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1546 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.