FortiAP 221C require restart after 3 days

[Adnan_Khalid]

I have 2 fortigate 100D in HA cluster mode and 10 fortiAP 221 C connected through switched infrastruture. FortiAP stop working after 2 to 3 days. But After restarting the APs ,everything works fine. Any Idea ??

[pcraponi]

Are you using the special FortiOS build 4457 ? Regards, Paulo Raponi

[Adnan_Khalid]

yes ...from wireless controller section Firmware Version v5.0,build4457 (GA Patch 7)

[TNT123]

Did you ever resolve this?

[dlandi]

Hi friends, I have the same problem with some teams FortiAP 320C ... in a forum of this site indicates an upgrade to 5.2 anyone know of this?

[TNT123]

I have upgraded to 5.2 on my 60D. So far so good. About 16 hours under my belt with two FAP-221C' s. Three SSID' s and 30 clients.

[dlandi]

Hi TNT123, as teams are working after patch

[Sean_Toomey_FTNT]

I would recommend the 5.2.0 version for 221C / 320C. I have been running that at my house for weeks with no issues. Cheers!

[Nihas]

Hi, According to the fortinet' s 5.2 release note you have to use 5.2 in 221C AP' s. Otherwise you may face performance issues.

[Istvan_Takacs_FTNT]

Hi guys, The 320s has console port to locally manage the device. You can do the same on the 220 but only via local ethernet port. Have you tried to login when it stops transmitting? Can you see anything on the screen or when you run some cw_diag command?