FortiAP 221C Firmware Upgrade from V5.2 Build 475 to v5.2.5

[Ashik_Sheik]

Hi,

I would like to know  Build 475 refer to which firmware patch or build.I tried upgrading one of the 221C to FAP_221C-v5-build0254 but AP is not responding .How to get the console ? there is no option .How to perform Hard Reset ?.

There is only orange light is showing .Is there a way to connect and Check the issue.

regds

Ashik

[SMFTNT]

Hi Ashik, If you can gain telnet access to the FAP can you please run, "fap-get-status" and provide the output. I am curious as to what is the Branch point number. As well if the 10 sec reset is not working then hold the reset until the power LED flashes and the network LED blinks orange, then release. After approx 1 min the power LED will be a solid green and the network LED blinking green. Thank you, Shawn