FortiADC - HTTP from same source, load balance technique.

[Tim_86]

Hi all,

I've got a question regarding the FortiADC.

We are load balancing from an external address to our ADC which goes to a few internal webservers.

In this case we've setup, Layer 7 - Round Robin.

The external address that reaches our ADC is always te same, and the ADC needs to balance it to the webservers.

I've checked the dashboard and log but can't clearly see the sessions being balanced, although it seems to look fine.

The cookbook doesn't really show a preferred way of balancing HTTP traffic from a static external source IP.

Any advice on this?

Kind regards,

Tim 

[locefaj]

tim@clnw.nl wrote:

Hi all,

I've got a question regarding the FortiADC.

We are load balancing from an external address to our ADC which goes to a few internal webservers.

In this case we've setup, Layer 7 - Round Robin.

The external address that reaches our ADC is always te same, and the ADC needs to balance it to the webservers.

I've checked the dashboard and log but can't clearly see the sessions being balanced, although it seems to look fine.

The cookbook doesn't really show a preferred way of balancing HTTP traffic from a static external source IP.

Any advice on this?

Kind regards,

Tim 

Hi buddy, are you trying to get it over the SSL certificate too?

Regards,

Loce Smith

[Tim_86]

Hi!

No, in this case it's only on port 80 http :)

Kind regards,

Tim