Hi Team,
I have deployed Forti manager v7.2.1 GA and I am running it as a trial license in my lab. I have added NSX-T (3.2) as a connector from Forti-manager.
However, when I hit apply and refresh to pull NSX-T groups it returns the attached error.
Even if I enable the status toggle on the connector then it returns another error message (snippet attached)
Any suggestions on what I am missing here?
Thanks
Vaibhav
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello Vaibhav,
Thank you for getting in touch with us about your NSX groups issue! I'm going to ask for a solution and reply to this thread with an update as soon as possible.
Thanks,
Stephen
Hi Vaibhav,
I am running the same problem.
could please let me know if you find the solution
Thanks,
Brahim.
Hi there,
Please refer to the following admin guide and make sure the Service Profile, Service Chain and Service Rule was configured in the NSX-T side.
At the same time, in FMG you can run debug to see any error being printed,
# diag debug application connector 255
# diag debug enab
I tried that you suggested and it returned same error
post enabling diagnostics below error is seen
forti-mgr #
forti-mgr # Request:
{ "client": "gui json:4729", "id": "340e30e2-1818-4424-9828-3d58642f34da", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "server_type": "nsx"}, "target start": 1, "url": "\/connector\/get\/adgrp"}], "session": 33811}
Chkperm Response:
{ "id": "340e30e2-1818-4424-9828-3d58642f34da", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}], "session": 33811}
__get_adgrp_list : no adgrp info obtained from server NSX-T
Response:
{ "id": "340e30e2-1818-4424-9828-3d58642f34da", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}]}
Request:
{ "client": "gui json:4736", "id": "3b858742-f879-498a-975a-968be6721865", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "if_all_user": 0, "objkey": "NSX-T", "server_type": "nsx", "type": "nsx"}, "target start": 1, "url": "\/connector\/get\/user"}], "session": 33811}
Chkperm Response:
{ "id": "3b858742-f879-498a-975a-968be6721865", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}], "session": 33811}
__get_user_list : no user info obtained from server NSX-T
Response:
{ "id": "3b858742-f879-498a-975a-968be6721865", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}]}
Request:
{ "client": "gui json:4737", "id": "158b3949-0a85-48be-aae7-aff1b3f948bd", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "server_type": "nsx"}, "target start": 1, "url": "\/connector\/get\/adgrp"}], "session": 33811}
Chkperm Response:
{ "id": "158b3949-0a85-48be-aae7-aff1b3f948bd", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}], "session": 33811}
__get_adgrp_list : no adgrp info obtained from server NSX-T
Response:
{ "id": "158b3949-0a85-48be-aae7-aff1b3f948bd", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}]}
Request:
{ "client": "gui json:4738", "id": "a8ee338b-681b-4cfa-a683-415da3f9d164", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "if_all_user": 0, "objkey": "NSX-T", "server_type": "nsx", "type": "nsx"}, "target start": 1, "url": "\/connector\/get\/user"}], "session": 33811}
Chkperm Response:
{ "id": "a8ee338b-681b-4cfa-a683-415da3f9d164", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}], "session": 33811}
__get_user_list : no user info obtained from server NSX-T
Response:
{ "id": "a8ee338b-681b-4cfa-a683-415da3f9d164", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}]}
Request:
{ "client": "gui json:4755", "id": "5911f299-2639-4acd-a8e1-b7a12af08c05", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "server_type": "nsx", "service_type": 0}, "target start": 1, "url": "\/connector\/update"}], "session": 33811}
Chkperm Response:
{ "id": "5911f299-2639-4acd-a8e1-b7a12af08c05", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/update"}], "session": 33811}
Response:
{ "id": "5911f299-2639-4acd-a8e1-b7a12af08c05", "result": [{ "data": { "taskid": 31}, "status": { "code": 0, "message": "OK"}, "url": "\/connector\/update"}]}
server(NSX-T) => get_nsx_groups_by_service: There is no service for this connector
server(NSX-T) => Failed to get NSX groups by service
server(NSX-T) => Server disconnect
reap child 4758 (255)
server(NSX-T) => Server disconnect
Request:
{ "client": "gui json:4795", "id": "cf11058d-b8f0-4f2d-9915-99d80a549b8e", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "if_all_user": 0, "objkey": "NSX-T", "server_type": "nsx", "type": "nsx"}, "target start": 1, "url": "\/connector\/get\/user"}], "session": 33811}
Chkperm Response:
{ "id": "cf11058d-b8f0-4f2d-9915-99d80a549b8e", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}], "session": 33811}
__get_user_list : no user info obtained from server NSX-T
Response:
{ "id": "cf11058d-b8f0-4f2d-9915-99d80a549b8e", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}]}
Request:
{ "client": "gui json:4793", "id": "1d46de3b-787c-4f69-8ff5-448919408c44", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "server_type": "nsx"}, "target start": 1, "url": "\/connector\/get\/adgrp"}], "session": 33811}
Chkperm Response:
{ "id": "1d46de3b-787c-4f69-8ff5-448919408c44", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}], "session": 33811}
__get_adgrp_list : no adgrp info obtained from server NSX-T
Response:
{ "id": "1d46de3b-787c-4f69-8ff5-448919408c44", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}]}
Request:
{ "client": "gui json:4797", "id": "e2525a77-4379-4f04-979b-f5383758b454", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "server_type": "nsx"}, "target start": 1, "url": "\/connector\/get\/adgrp"}], "session": 33811}
Chkperm Response:
{ "id": "e2525a77-4379-4f04-979b-f5383758b454", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}], "session": 33811}
__get_adgrp_list : no adgrp info obtained from server NSX-T
Response:
{ "id": "e2525a77-4379-4f04-979b-f5383758b454", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}]}
Request:
{ "client": "gui json:4799", "id": "b6c92a18-fcb0-44b4-968e-2a1d355694cb", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "if_all_user": 0, "objkey": "NSX-T", "server_type": "nsx", "type": "nsx"}, "target start": 1, "url": "\/connector\/get\/user"}], "session": 33811}
Chkperm Response:
{ "id": "b6c92a18-fcb0-44b4-968e-2a1d355694cb", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}], "session": 33811}
__get_user_list : no user info obtained from server NSX-T
Response:
{ "id": "b6c92a18-fcb0-44b4-968e-2a1d355694cb", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}]}
Request:
{ "client": "gui json:4809", "id": "933f8b70-620b-4ccb-8d38-23b927d68e8d", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "server_type": "nsx"}, "target start": 1, "url": "\/connector\/get\/adgrp"}], "session": 33811}
Chkperm Response:
{ "id": "933f8b70-620b-4ccb-8d38-23b927d68e8d", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}], "session": 33811}
__get_adgrp_list : no adgrp info obtained from server NSX-T
Response:
{ "id": "933f8b70-620b-4ccb-8d38-23b927d68e8d", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/adgrp"}]}
Request:
{ "client": "gui json:4811", "id": "db6528ac-7ca3-424f-bc44-455e57dea516", "keep_session_idle": 1, "method": "exec", "params": [{ "data": { "adom": "root", "connector": "NSX-T", "if_all_user": 0, "objkey": "NSX-T", "server_type": "nsx", "type": "nsx"}, "target start": 1, "url": "\/connector\/get\/user"}], "session": 33811}
Chkperm Response:
{ "id": "db6528ac-7ca3-424f-bc44-455e57dea516", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}], "session": 33811}
__get_user_list : no user info obtained from server NSX-T
Response:
{ "id": "db6528ac-7ca3-424f-bc44-455e57dea516", "result": [{ "status": { "code": 0, "message": "OK"}, "url": "\/connector\/get\/user"}]}
Any update here .. thanks
Hi,
we are facing the same issue. NSX-T connector is not working since 7.x.x. Even with a fresh FMG install 7.0.x and 7.2.x it is not working.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1558 | |
1034 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.