Hello,
I have a simple question:
Is it possible to connect a LACP interface (of 8 ports) to several different switch?
To be more precise, i have 4 switch behind my ha-forti-101E (so 2 ports of LACP interface are connected to 1 switch).
On this 4 switch, i've got 2 of them stacked.
So, at logical level, i have 3 switch.
From port 13 to 16, it's connected to the 2 stacked switch => no problem, when i check their status, it's good, the lacp state is established.
But for the other port, it's pending at "negociating".
port 9 & 10 are connected to one switch.
port 11 & 12 are connected to the last one.
Can someone already tried this type de configuration please?
Thanks :)
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
If they are a true stack than yes, this is doable. I would double check if you can do 8 member bundle on a 101E tho.
Why 8 ports ? Do you think you need that level of redundancy? Your not going to get 8gig if I had to guess ;)
PCNSE
NSE
StrongSwan
Hi Emnoc,
No, i know i'm not going to have 8Gb bandwidth ^^
According to this kb, 8 ports in 802.ad interface is possible http://kb.fortinet.com/kb/viewContent.do?externalId=11640
8 is just redanduncy and the landing in a defective switch...
So, in my case, it's not possible to have an LACP interface with 8 ports connected to 3 different logical switch, can you confirm...is that it ?
Thanks for your help
I can confirm that you can run an LACP trunk from a FGT HA pair to a pair of stacked switches running ComOS (HP A5900 series, ex-Huawei). IMHO your design doesn't make too much sense. I've never seen a stack of switches (of 2 switches) fed from separate power feeds die at the same time. That is, HP/H3C/3Com switches, ComOS v5 and v7.
I never seen more than 2x ports in a LACP from Huawei personally, but I have done a 4x 1GIGE bundle two a 2960S stack ( one interface per-switch )
if a limit exist it will be either on the FGT aide as maybe you can't do 8x LACP members or the huwawei side of things
FWIW, I never seen a 8 member LACPbundle to anything in my life. Give it a try and let's us know what comes up ;)
PCNSE
NSE
StrongSwan
LACP bundles can have up to 8 ports bundled in ComOS.
BTW, the 2960S is a Cisco switch, right?
Yes the 2960S is a 2906 layer2 and stackable.
Ken
PCNSE
NSE
StrongSwan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.