Hi There,
I have a Forti-Analyzer hosted in azure running V7.4.1 most the D series and some E series firewalls are not able to connect to the FAZ and there's an SSL error generated on test and in the system logs.
I do have other models which don't have the issue, I have 58 devices in total (60E, 61F, 81F, 60F, VM64 - Azure)
The firewalls which are having issues are on the following versions -
60D | 6.0.17 Build0528 (GA)
80E | 6.0.16 Build0505 (GA)
90D | 6.0.16 Build0505 (GA)
The error message generated in the system logs of the firewalls are as follows.
Log Description FortiAnalyzer connection failed
Action connect
Status failure
Reason ssl_connect() failed: 1
Event
Message Failed to connect FortiAnalyzer "IP Removed"
Log event original timestamp 1697620251
Log ID 22903
Sub Type system
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Owen
On your FortiGate:
config log fortianalyzer setting
Then try change the below parameters to a higher security.
enc-algorithm
ssl-min-proto-version
Hi There,
here are the current settings.
# show
config log fortianalyzer setting
set status enable
set server "IP REDACTED"
set ssl-min-proto-version SSLv3
set reliable enable
end
Still getting the same problem.
Hi
Please share this output:
config log fortianalyzer setting
get
set enc-algorithm ?
set ssl-min-proto-version ?
Hi There,
Please see the fortigate setting:
unit6 # config log fortianalyzer setting
(setting) # get
status : enable
ips-archive : enable
server : IP REDACTED
enc-algorithm : high
ssl-min-proto-version: SSLv3
conn-timeout : 10
monitor-keepalive-period: 5
monitor-failure-retry-period: 5
certificate :
source-ip :
upload-option : 5-minute
reliable : enable
Faz Side :
(global)# get
ssl-low-encryption : enable
ssl-protocol : tlsv1.3 tlsv1.2
(central-management)# get
get
type : fortimanager
allow-monitor : enable
fmg : (null)
enc-algorithm : default
authorized-manager-only: enable
serial-number :
ssl-min-proto-version on your FG is not ok.
Should be TLS 1.2
Hi There,
I've changed the FortiGate setting but still get the same problem.
# get
status : enable
ips-archive : enable
server : IP Removed
enc-algorithm : high
ssl-min-proto-version: TLSv1-2
Try delete this FGT from FAZ and then add it again.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.