Forti 200E - Aggregate LAN

[Marcde_J]

Hi All

I'm planning on creating a Aggregate Link for WAN on my Forti 200E.

Would i need to create a trunk/LACP on my switch to accomplish same? (Aruba switch)

[bpozdena_FTNT · Accepted solution]

Hi @Marcde_J ,

Yes, LACP needs to be enabled on both endpoints. At least one of the endpoints needs to operate in LACP Active mode for the negotiation to work.

Related Docs:

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Initial-troubleshooting-steps-for-LACP-Lin...

https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/567758/aggregation-and-redun...

https://docs.fortinet.com/document/fortigate/7.4.1/cli-reference/8620/config-system-interface

[Marcde_J]

Thank you so much