Help
Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Not applicable

Created on ‎12-20-2011 08:33 AM

Firmware upgrade and booting to another image

Hello, I have a Fortigate 300A running FortiOS 3.0. I need to upgrade it to the same version on another 300A I have: v4.0,build0303,101214 (MR2 Patch 3). * Can I upgrade directly from the old version to 4.0 MR2 or I should upgrade to some other version between? * I noticed that the 300A can save 2 firmware versions. How do I boot to another firmware than the new one I install? * Does it boot to the older firmware when I do a factory reset to the appliance? Thanks.
3588
0 Kudos
7 REPLIES 7
Jan_Scholten
Contributor

Created on ‎12-22-2011 05:05 AM

When you want to have a clean install do a factory reset and just upload the new firmware. If you want to upgrade follow the upgrade path which is clearly described in the Release notes. AFAIK every Fortigate has two firmware which you can boot as alternative ( i think System > Maintenance > Backup and Restore. There should be both partitions visible with a button to boot the alternate firmware) You can do that on CLI as well: execute set-next-reboot {primary | secondary} Execute firmware sets the config (not the firmware) to the default one. So your firmware stays, only your interfaces get 192.168.1.99,192.168.2.99 aso..
2507
0 Kudos
rwpatterson
Valued Contributor III
In response to Jan_Scholten

Created on ‎12-22-2011 05:56 AM

ORIGINAL: Jan Scholten AFAIK every Fortigate has two firmware which you can boot as alternative ( i think System > Maintenance > Backup and Restore. There should be both partitions visible with a button to boot the alternate firmware)
I believe only the boxes bigger than the 100 series do have two.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
2507
0 Kudos
Jan_Scholten
Contributor

Created on ‎12-22-2011 06:18 AM

Really? At least the 60C has (i must admit i have not many fgts below a 100A) i just checked: a 50B does not have dual firmwares.. Nevertheless: the 300A should have two partitions.
2507
0 Kudos
rwpatterson
Valued Contributor III
In response to Jan_Scholten

Created on ‎12-22-2011 06:57 AM

OK, how about the smallest boxes (30, 50, 50A, 50B, 60, 60A & 60B) do not have this option. My 80C does. Omelet in the face...

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
2507
0 Kudos
Not applicable

Created on ‎12-22-2011 06:28 AM

Is it possible to switch to the other firmware in case an upgrade fail?
2507
0 Kudos
FortiRack_Eric
New Contributor III

Created on ‎12-22-2011 06:33 AM

yes, in pre-boot (console) you can switch to alternative firmware Cheers, Eric

Rackmount your Fortinet --> http://www.rackmount.it/fortirack

 

Rackmount your Fortinet --> http://www.rackmount.it/fortirack
2507
0 Kudos
FortiRack_Eric
New Contributor III

Created on ‎12-22-2011 07:28 AM

60b, 50b, 30b, 50a don' t have the dual image 60c, 51b do. Cheers, Eric

Rackmount your Fortinet --> http://www.rackmount.it/fortirack

 

Rackmount your Fortinet --> http://www.rackmount.it/fortirack
2507
0 Kudos
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors
View all
Broad. Integrated. Automated.

The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.

Social Media
Security Research
Company
News & Articles
Contact Us

Copyright 2024 Fortinet, Inc. All Rights Reserved.