Hi,
When I run "diag sys flash list" on the firewall, it only shows version 7.0.x.
However my current firewall firmware version is 7.2.x.
Why is the current firewall firmware version not stored in the harddisk partition?
So where has it disappeared to?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi BusinessUser,
That is the naming convention in the flash partition.
Please refer to the build number for confirmation.
Thank you.
Hi BusinessUser,
For sys flash list, example as below:
xxxx-6.00-FW-build0272 <<<<<Version 6.0
xxxx-6.02-FW-build1142 <<<<<Version 6.2
xxxx-7.00-FW-build0444 <<<<<Version 7.0
xxxx-7.02-FW-build1517 <<<<<Version 7.2
Please confirm if you see 7.02 and do compare the build number.
Thank you.
Ok I see it.
But why is version 7.2 not starting with 7.2 instead?
Hi BusinessUser,
That is the naming convention in the flash partition.
Please refer to the build number for confirmation.
Thank you.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1502 | |
1011 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.