Hello, guys!
Some few weeks after upgrading my 80F to fortiOS 7.4 the web gui page for firewall policy stopped loading.
Any ideas?
Thanks!
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello @therculano
There is a bug ID: 910068 on 7.4.0 version. Please refer to https://docs.fortinet.com/document/fortigate/7.4.0/fortios-release-notes/236526/known-issues
On the Policy & Objects > Firewall Policy page, if any of the interface names contain a space, the page does not load when Interface Pair View is selected.
Workaround: remove all space characters in interface names referenced in policies.
This bug will be resolved in 7.4.1. Please let me know if the workaround work for you.
Hi therculano,
First of all, please try clearing the browser's cache or use a different browser private/incognito window. If the issue persists, you can try restarting https daemon by running "fnsysctl killall httpsd" in the CLI. If my answer helps, please mark it as resolved.
Hello hbac!
I tryed it on 4 different browsers but I got the same result and the command "fnsysctl killall httpsd" didn't work as well.
Hello @therculano
There is a bug ID: 910068 on 7.4.0 version. Please refer to https://docs.fortinet.com/document/fortigate/7.4.0/fortios-release-notes/236526/known-issues
On the Policy & Objects > Firewall Policy page, if any of the interface names contain a space, the page does not load when Interface Pair View is selected.
Workaround: remove all space characters in interface names referenced in policies.
This bug will be resolved in 7.4.1. Please let me know if the workaround work for you.
Hi @hbac,
I have only one interface with space in its name, but it is an ipsec tunnel. How can I change its name without recreating the tunnel or turning it down?
Thanks!
Hi @therculano,
Unfortunately, it is not possible to rename the tunnel. Please refer to https://community.fortinet.com/t5/FortiGate/Technical-Tip-Rename-IPSEC-tunnel/ta-p/221983
Does it load when selecting 'By Sequence' instead of 'Interface Pair View'?
You can either recreate the tunnel or wait for 7.4.1 which will be released at the end of this month or early September.
Regards,
@hbac, selecting "by sequence" it loads, but it is not a very good view for what I need.
Thank you, hbac!
There is a bug ID: 910068 on 7.4.0 version. Please refer to https://docs.fortinet.com/document/fortigate/7.4.0/fortios-release-notes/236526/known-issues
Try to check from other browser also, and clear browse cache and check it>
if still issue presisting, and next upgrade to 7.4.1.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1705 | |
1093 | |
752 | |
446 | |
230 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.