Firewall and FTP REST

[HQS]

Hi, i use the REST Command for a FTP connection and get the following error msg:

502 Command REST not allowed by policy.

I create a Firewallpolicy but this rule doesn´t work:

 config firewall policy
     edit 34
         set srcintf " internal1" 
         set dstintf " wan1" 
             set srcaddr " Srv-Internal" 
             set dstaddr " External-FTP" 
         set action accept
         set utm-status enable
         set schedule " always" 
             set service " FTP Group" 
         set av-profile " unfiltered" 
         set profile-protocol-options " unfiltered" 
         set nat enable
     next
 end
 

Has anyone an idea what could be wrong? Cheers

[edsouza_FTNT]

First, if you are going to use the " unfiltered" profiles, do you even need utm-status enabled? 2nd please post the antivirus and protocol-options " unfiltered" profile configuration.

[HQS]

Hi, if utm is disabled, the unfiltered profiles aren´t available. I can disable the utm profile but the error also exist. Here my Profile:

 show antivirus profile unfiltered
 config antivirus profile
     edit " unfiltered" 
     next
 end
 

What do you mean with Protocol-Options? Cheers

[HQS]

Hi, i solved this Problem:

 config firewall policy
     edit 34
         set srcintf " internal1" 
         set dstintf " wan1" 
             set srcaddr " Mietserver5" 
             set dstaddr " Euronics FTP" 
         set action accept
         set utm-status enable
         set schedule " always" 
             set service " FTP Group" 
         set av-profile " unfiltered" 
         set webfilter-profile " unfiltered" 
         set profile-protocol-options " unfiltered" 
         set nat enable
     next
 end
 

UTM Webfilter must be set to unfilterd! Than it works fine... Cheers