Firewall Sub-interface not working

[marlon_porras17]

Dear all,

I have recently installed two 300D in HA active-active , but i have a connection problem with one sub-interface connection.

I have port 1 connected directly to a SwitchL3,  in port 2  i have two subinterfaces that goes to a switch l2 , mainly i'm focusing to troubleshoot from firewall to SwitchL3, ping is ok  from port 1 to 10.121.14.14 (VIP-SWL3) , ping is also ok from port 2 sub-interface 10.121.13.193 (Vlan 300) to 10.121.14.14 (VIP-SWL3) , but is not ok from port 2 sub-interface 10.121.14.193 (vlan 301) to 10.121.14.14(VIP-SWL3) .

There is a default route 0.0.0.0/0 10.121.14.14 (IP from SWitchL3) , and the policies are done identical with both sub-interfaces. The switchL3 is routing to my two subnetworks too, what am i missing? , why the second sub-interface not working? , i attach one quick draft of connections.

Thanks in advance