Attempted an ISP cutover tonight on an HA pair of 501Es
The goal was to swap the ISP connection from port 1 to port 9.
The gate recognizes the transceiver and doesn't complain about incompatibility. It's an actual Fortinet SFP.
Test on the fiber line coming in are good, but when plugged into our port we just never get link lights. ISP sees nothing connected. Is there some secret thing I don't know about that I need to do to turn these ports on? It's an HA pair and no link on either device, so that kinda rules out bad SFP, or bad patch cable, because it's unlikely we would have a dual set of broken parts, but still tried swapping em out, just for funsies.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello lolit6,
Please refer to the below documents:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuring-100G-SFP-ports/ta-p/192177
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Configuring-SFP-interface-on-10-GE-SFP-and...
Hi,
Could you help us with the below outputs:
get sys interface transceiver
diag hardware deviceinfo nic <interface>
get hardware nic <portnumber>
Regards,
Vimala
I would recommend checking the speed set for the port you are connecting to. That could be a part of the issue.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.